-40%
Universal 5/16
Universal 5/16
Universal 5/16
Universal 5/16
Universal 5/16
Universal 5/16
Universal 5/16

Universal 5/16" Molded Fuel Line Cut-Your-Own Rubber Hose Elbow 45° 90° 180° 8mm

$ 9.47

Availability: 511 in stock
  • Condition: New
  • Surface Finish: Fiber Reinforced NBR Nitrile Rubber
  • Applictions: Gasoline Hose, PCV Valve, Fuel Injection
  • Mounting Hardware Included: No
  • Shape: Elbow, Bend, U, Turn, Angle, Bent
  • UPC: 689353618317
  • Country/Region of Manufacture: Taiwan
  • Material: Fiber-Reinforced Molded NBR
  • Manufacturer Part Number: RMI-33005
  • Used on: Boat, Hot Rod, Classic Car, Motorcycle Tanks
  • Brand: RetroMotion Innovations
  • Size: 5/16", 0.3125", 8mm
  • Type: J30R7

    Description

    Build-Your-Own Molded Rubber Fuel Hose
    BIN: RMO
    This is a custom shaped fuel line available
    exclusively
    from us at RetroMotion Innovations! We designed this "swan shape" molded hose to be cut to a variety of shapes needed to route fuel or oil.  It can be cut
    into 4 pieces for your project to give you 45, 90, 135, and 180 degree bends
    .
    Reinforced molded rubber hose for carburetors and fuel injection systems with
    up to 75 PSI working pressure.  This will fit 5/16" and 8mm hose barbs and hard fuel supply lines from tanks to carburetors.  This is fuel-grade hose that exceeds the SAE J30R7 specifications.
    You can cut any section out of this hose and use any part of it, just trim to length or shape and tighten with hose clamps (clamps not provided).  If desired, any printing on the hose can be wiped away with lacquer thinner for a cleaner look.
    Dimensions:
    Inner Diameter: .3125" (8 mm)
    Outer Diameter: .57"
    Specs:
    Built to SAE J30R7 For
    Permeability
    Working pressure: 75PSI
    Burst Pressure: 250 PSI
    Temperature Range:
    -40°F to +257°F (-40°C to +125°C)
    Applications: Fuel Injection, Low Pressure Gasoline, Diesel, Ethanol E10, E85, PCV
    Emissions
    Hose, Oil